0
directdroneslogo
0
Have you seen our United States website? Visit usa today!
We also have websites for: Visit usa Visit usa Visit usa Visit usa Visit usa

Rcmodelpart Pixhawk PX4 32Bit Flight Controller + NEO-M8N GPS + Power Module +Shock Absorber for Multirotor FPV by Rcmodelpart

Price: £76.82
Product prices and availability are accurate as of 2019-11-13 19:46:00 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Description

We are inspired to offer the excellent Rcmodelpart Pixhawk PX4 32Bit Flight Controller + NEO-M8N GPS + Power Module +Shock Absorber for Multirotor FPV.

With so many on offer recently, it is great to have a brand you can believe in. The Rcmodelpart Pixhawk PX4 32Bit Flight Controller + NEO-M8N GPS + Power Module +Shock Absorber for Multirotor FPV is certainly that and will be a great bargain buy.

For this great price, the Rcmodelpart Pixhawk PX4 32Bit Flight Controller + NEO-M8N GPS + Power Module +Shock Absorber for Multirotor FPV comes highly recommended and is a regular choice with most people. Rcmodelpart have added some excellent touches and this means great value.

Manufacturer Description

Pixhawk V2.4.8 32Bit Flight Controller
- Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system;
- 14* PWM/ actuator output;
- Bus interface (UART, I2C, SPI, CAN);
- Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control;
- Provide automatic and manual mode;
- Provide redundant power input and fault transfer function;
- Color LED lamp;
- Multi tone buzzer interface;
- Micro SD to record flight data;

Processor:
- 32 bit 2M flash memory STM32F427 Cortex M4, with hardware floating point processing unit
- Main frequency: 256K, 168MHZ RAM
- 32 bit STM32F103 backup co processor

Sensor:
- L3GD20 3 axis digital 16 bit gyroscope
- LSM303D 3 axis 14 bit accelerometer /magnetometer
- MPU6000 6 axis accelerometer / magnetometer
- MS5611 high precision barometer

Interface:
- 5* UART, 1*compatible high voltage, 2*hardware flow control
- 2*CAN
- Spektrum DSM/DSM2/DSM-X satellite receiver compatible input
- Futaba SBUS compatible input and output
- PPM signal input
- RSSI (PWM or voltage) input
- I2C
- SPI
- 3.3 and 6.6VADC input
- External USB MICRO interface

M8N GPS Module
- Receiver type 72-channel u-blox M8 engine
- Nav. update rate1 Single GNSS: up to 18 HZ
- Concurrent GNSS: up to 10 Hz
- Memory ROM ( M8M/Q) or Flash ( M8N)
- Supply voltage 1.65 V to 3.6 V ( M8M)
- Backup Supply 1.4 to 3.6 V
- TCXO, flash, SAW, LNA,
- Connection: APM interface (come with a Pixhawk 6pin interface)

Package includes
1x Pixhawk V2.4.8 Flight Controller(comes with Buzzer,Switch,1G SD Card)
1x M8N GPS
1x GPS Holder
1x Shock Absorber
1x Power module

Product Features

Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system Bus interface (UART, I2C, SPI, CAN) Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control Provide automatic and manual mode Provide redundant power input and fault transfer function

Write a Review

Fresh Store Builder - The Most Advanced Amazon Affiliate Software